(2 reviews)

Drone Crates® DJI Inspire 2 Case - Landing Mode w/ Wheels (Version 2)

$495.00
SKU:
DCI2RV2
UPC:
637390989990
Availability:
IN STOCK - SHIPS WITHIN 24 HOURS
Share

 FREE Ground Shipping (Lower 48) - Discounted Shipping Elsewhere

NOW UPDATED TO SUPPORT THE CRYSTAL SKY MONITORS & CENDENCE REMOTES. ALSO NOW USING A PELICAN OUTTER SHELL

Drone Crates is happy to introduce it’s all new DJI Inspire 2 Landing Mode Case, which was co-designed with the guys from Drone Gear.

We took the successful formula of our DJI Inspire 1 case and ported it over to our all new Inspire 2 Landing Mode case. The goal with this case is to get you flying as fast as possible, and to do that we designed the case to support the Inspire 2 in landing mode so you can simply pull the Inspire 2 out, install props, power it on and go. The other key point we wanted was to keep the case as small as possible. The new DJI Inspire 2 has grown somewhat in size compared to the previous generation, as a result we put it in the smallest hard shell possible, while still meeting the rest of our goals. This case is crush proof, water tight, and air tight. It comes with a retractable handle & inline skate style wheels for easy towing, as well as comes with our standard lifetime warranty. Our foam inserts are fully CAD designed and precision water-jet cut (no cheap die cutting here) and made with premium quality poyethylene closed cell foam. What you end up with is a rugged premium case that can handle anything you throw at it. 

 

 

Drone Crates Inspire 2 Travel Mode Case Features:

◦ Made In The USA

◦ (4) Carry Handles

◦ Retractable Lock Up & Down Position Pull Handle

◦ In-line skate style wheels for easy transport

◦ Trigger release latches can be retrofitted with TSA accepted key locking latches

◦ Mil Spec Outer Shell Used By The US Military

◦ Waterproof and dust tight design (MIL-C-4150J)

◦ Ambient pressure equalization valve (MIL-STD-648C)

◦ Resistant to UV, solvents, corrosion, fungus (MIL-STD-810F)

◦ Resistant to impact damage (MIL-STD-810F)

◦ Premium Poyethylene Closed Cell Foam

◦ Water-Jet Cut Foam Insert – No Cheap Die Cutting

◦ CAD Designed For Optimal Fitment

◦ Lifetime Guarantee – We Fully Stand Behind All Of Our Products

 

Case Holds The Following:

(1) DJI Inspire 2 with X4S or X5S Camera Attached

(1) DJI Zenmus X4S, X5S or X7 Gimbal Camera Box Storage

(2) DJI Inspire 2 Remotes With Tablet/Phone Mount - Standard or Cendence

(3) DJI Inspire 2 Battery Charging Hubs

(2) 7” or 10” Tablets or Crystal Sky Monitors (Both Sized) 

(4-6) Spare Sets Of Prop Storage

(12) DJI Inspire 2 Batteries (10 storage cavities + 2 inside the Inspire 2)

(6) DJI Inspire 2 Solid State Hard Drives

(1) Cinestation 

(2) Large Accessory Cavity For Focus Control, Charger Bricks, Cables, Filters and Misc Accessories

 

Exterior Dimensions:

24.8" x 24.9" x 14.1"

 

Drones, UAVS & Accessories Not Included With Cases. All products shown are for display purposes only. 

All cases offer a lifetime warranty against defects in materials and craftsmanship. In the event your case has an issue Drone Crates will be happy to replace, repair, or supply parts for the case depending on the situation at no cost. The lifetime warranty is valid for the original purchaser only and proof of purchase is required for all warranty claims. Common wear and tear is not covered.

Drone Crates® DJI Inspire 2 Case - Landing Mode w/ Wheels (Version 2) Reviews

Based on 2 reviews

Outstanding Case for the Inspire 2

Posted by Michael on 14th May 2018

I have been extremely impressed with the Drone Crates Inspire 2 Landing Mode case. The case itself and foam are very high quality. Tons of space for batteries, controllers, CrystalSky, everything!

Well done

Posted by Jim M on 6th Apr 2018

I've had other brands for previous drones but this case, while larger than I think it could be, is well made. And the price seems to be below their competition.